IF YOU'RE in the heavy equipment and heavy vehicle maintenance and servicing industries, you might like to consider these "Ready to Work” truck-sized tool trolleys.
Isuzu Australia's "Ready to Work” Servicepack range comprises a variety of models and configurations in the ever-popular N series including all wheel drive crew cab and single cabs as well as 4x2 crew and single cab versions.
Earlier in the year Isuzu beefed up the Servicepack NSeries range with the addition of the NPS 75-155 4x4 Servicepack and the NPS 75-155 4x4 Crew Servicepack.
The NPS 75-155 4x4 Servicepack models have a GVM of 7.5 tonnes, a GCM of 11 tonnes and a towing capacity of 3.5 tonnes.
Both have a wheelbase of 3.395m, an overall length of 5.985m and a cab height of 2.49m.
They are powered by Isuzu's 5.2-litre 4HK1-TCN turbo-charged diesel engine and are matched to Isuzu's MYY 5A five-speed manual gearbox, which has provision for a PTO on the left-hand side of the transmission case.
In the cab there are electric control switches for four-wheel-drive selection and for high/low range engagement.
The single-cab version has a single driver's seat and a two-seat bench seat, while the crew cab has the addition of a rear bench seat for four adults with three-point lap-sash seatbelts on both rear outboard sitting positions.
Behind the dual cab is the factory-fitted powder-coated steel service body that has seven lockable, LED-lit storage compartments that have a total volume of 3.2cubic metres of storage space plus there's a 1.88m x 1m central storage area with a chequer plate floor and four tie-down points at deck level.
The factory-fitted Servicepack on all the NSeries models feature lockable compartments within the powder-coated steel service body that are fully integrated with the vehicle's central locking system.
This means tools and equipment can be transported to the job site safely and securely.